44 lines
3.0 KiB
Plaintext
44 lines
3.0 KiB
Plaintext
CONCEPT ONLY; NOT ASSEMBLY FIT VALIDATION.
|
|
Both flanges: disc OD57 thickness4, 6x PCD48 5.5 clearance; hub OD30 protrudes 20 from the base. Mirrored.
|
|
Shaft nominal 12 x 120; z=-178.0..-58.0; motor hub z=-70..-50; motor insertion 12mm assumed.
|
|
Wheel hub z=-176..-156, front plate z=-180..-176; hub engagement 20.0 mm; plate bore overlap 2.0 mm (this is not extra key engagement).
|
|
Bearing positions, 50mm switch envelope and cam as previous shifted design; rear/front hub clearance to simplified outer bearing 0.5mm nominal.
|
|
KFL approximate 48 bolt pitch and 14.5 inner width, housing/protrusion guessed; 8mm plate 30.2 hole guessed; no real module shape, its 47mm hole is an assumption.
|
|
Wheel70 is real STEP, mirror/phase0, rear face in contact with front flange disc, PCD48 hole centers align nominally; bolt direction, washer and tool clearances not checked.
|
|
Real converter/70 STEP hole OD4.234, fastener M4 feasible only with washers and actual size checks; M5 cannot pass nominally; hole intersections/phase and actual hardware must be checked.
|
|
Shaft endpoint keys not modeled; front hub insertion alone does not establish permissible torque. Actual axial gap, M3 nut, alignments, float bearing arrangement, switch/fan/angles, bolt heads, tool accessibility, and fit/strength not verified.
|
|
Checked positive-volume intersections of listed pairs only:
|
|
Plate0 / KFLHousing0 = 0.000000 mm3
|
|
Plate1 / KFLHousing1 = 0.000000 mm3
|
|
Plate0 / KFLInner0 = 0.000000 mm3
|
|
Plate1 / KFLInner1 = 0.000000 mm3
|
|
SwitchEnvelope / CamUpper = 0.000000 mm3
|
|
SwitchEnvelope / CamLower = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware0 = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware1 = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware2 = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware3 = 0.000000 mm3
|
|
MotorFlange / Shaft = 0.000000 mm3
|
|
WheelHub / Shaft = 0.000000 mm3
|
|
WheelHub / 70Adapter = 0.000000 mm3
|
|
Plate0 / Plate1 = 0.000000 mm3
|
|
MotorFlange / RearBearing = 0.000000 mm3
|
|
MotorFlange / RearInner = 0.000000 mm3
|
|
MotorFlange / RearPlate = 0.000000 mm3
|
|
WheelHub / FrontBearing = 0.000000 mm3
|
|
WheelHub / FrontInner = 0.000000 mm3
|
|
WheelHub / FrontPlate = 0.000000 mm3
|
|
MotorFlange / Conversion = 0.000000 mm3
|
|
Wheel bolt path 0: shaft probe / flange 0.00000000 / 70plate 0.00000000 mm3
|
|
Wheel bolt path 1: shaft probe / flange 0.00000000 / 70plate 0.00000000 mm3
|
|
Wheel bolt path 2: shaft probe / flange 0.00000000 / 70plate 0.00000000 mm3
|
|
Wheel bolt path 3: shaft probe / flange 0.00000000 / 70plate 0.00000000 mm3
|
|
Wheel bolt path 4: shaft probe / flange 0.00000000 / 70plate 0.00000000 mm3
|
|
Wheel bolt path 5: shaft probe / flange 0.00000000 / 70plate 0.00000000 mm3
|
|
Motor bolt path 0: probe / flange 0.00000000 / converter 0.00000000 mm3
|
|
Motor bolt path 1: probe / flange 0.00000000 / converter 0.00000000 mm3
|
|
Motor bolt path 2: probe / flange 0.00000000 / converter 0.00000000 mm3
|
|
Motor bolt path 3: probe / flange 0.00000000 / converter 0.00000000 mm3
|
|
Motor bolt path 4: probe / flange 0.00000000 / converter 0.00000000 mm3
|
|
Motor bolt path 5: probe / flange 0.00000000 / converter 0.00000000 mm3
|