30 lines
2.0 KiB
Plaintext
30 lines
2.0 KiB
Plaintext
CONCEPT ONLY; NOT ASSEMBLY FIT VALIDATION.
|
|
Motor side flange disc OD57 thickness4, six PCD48 holes nominal5.5; hub OD30 extending20 past disc face. Wheel side hub OD20 assumed.
|
|
Z decreases from motor toward steering wheel; motor rear z0; wheel shaft z=-58..-158 length100.
|
|
KFL actual nominal 63x38 housing envelope, 48 bolt centers, 7 hole, 5.5 ears, inner 14.5; protrusion OD29 and position assumed.
|
|
8mm plates central hole OD30.2 assumed, not actual production spec.
|
|
50mm switch opaque-enclosing envelope z=-138.5..-88.5; opening OD47 ASSUMED only; real rotary features and contacts unknown.
|
|
Comparison: shaft z=-58..-158, motor hub z=-70..-50: nominal overlap12mm. Rear bearing and switch and wheel hub shifted toward wheel 10mm. Wheel hub z=-162..-153: actual overlap5mm with shaft, is not adequate without verified engineering data.
|
|
Sleeve20 sits inside switch envelope and is not additional 20mm.
|
|
Motor mounting boss, shaft end keys, original M3 nut, lights/white contacts, bearing set screws, pin fastening/head/tool and adjuster are not modelled.
|
|
No workable fit is demonstrated. Real KFL and switch shapes, motor M3 nut and both shaft end details, fastener/tool paths, front hub and contact/clearances are unmeasured.
|
|
Checked positive-volume intersections (other pairs, loaded operation, exact bearing and switch shape not tested):
|
|
Plate0 / KFLHousing0 = 0.000000 mm3
|
|
Plate1 / KFLHousing1 = 0.000000 mm3
|
|
Plate0 / KFLInner0 = 0.000000 mm3
|
|
Plate1 / KFLInner1 = 0.000000 mm3
|
|
SwitchEnvelope / CamUpper = 0.000000 mm3
|
|
SwitchEnvelope / CamLower = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware0 = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware1 = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware2 = 0.000000 mm3
|
|
SwitchEnvelope / CamHardware3 = 0.000000 mm3
|
|
MotorFlange / Shaft = 0.000000 mm3
|
|
WheelHub / Shaft = 0.000000 mm3
|
|
WheelHub / 70Adapter = 0.000000 mm3
|
|
Plate0 / Plate1 = 0.000000 mm3
|
|
MotorFlange / RearBearing = 0.000000 mm3
|
|
MotorFlange / RearInner = 0.000000 mm3
|
|
MotorFlange / RearPlate = 0.000000 mm3
|
|
WheelHub / FrontBearing = 76.576321 mm3
|