28 lines
1.2 KiB
Plaintext
28 lines
1.2 KiB
Plaintext
PRELIMINARY concept only, do not print.
|
|
Shaft: 12x100; middle keyway only, shaft end details omitted.
|
|
Body axial overall 20; cam corner radius 21.7706; total swept diameter 43.5412
|
|
Clamping envelope including screw/nut and ears 33.4718
|
|
key: 4 x 4 x 12 hypothetical; local keyway depth shaft 2mm and hub 2.3mm, width 4.2mm.
|
|
clamp gap 0.4mm, bore 12.2mm nominal; M3 clearance dia 3.4; cylindrical 6.6mm relief (nut captured only visually, nut rotation restraint not modeled).
|
|
Calculated positive-volume intersections (mm3):
|
|
upper-lower 0.00000000
|
|
upper-shaft 0.00000000
|
|
lower-shaft 0.00000000
|
|
key-shaft 0.00000000
|
|
key-upper 0.00000000
|
|
key-lower 0.00000000
|
|
hardware0-upper 0.00000000
|
|
hardware0-lower 0.00000000
|
|
hardware0-shaft 0.00000000
|
|
hardware1-upper 0.00000000
|
|
hardware1-lower 0.00000000
|
|
hardware1-shaft 0.00000000
|
|
hardware2-upper 0.00000000
|
|
hardware2-lower 0.00000000
|
|
hardware2-shaft 0.00000000
|
|
hardware3-upper 0.00000000
|
|
hardware3-lower 0.00000000
|
|
hardware3-shaft 0.00000000
|
|
Fastener hex socket and actual switch/cam clearance unmodeled; proposed material, deflection, load and tooling clearance not validated.
|
|
100mm shaft position is schematic, module, both bearings, motor connection and wheel are unmodeled; fit cannot be inferred.
|