from pathlib import Path

root = Path(r'C:\projects\wheel')
scripts = root / 'scripts'
output = root / 'models' / 'kfl001_plate_v1'
output.mkdir(parents=True, exist_ok=True)

src = (scripts / 'build_kfl001_plate_draft.py').read_text(encoding='utf8')
for before, after in [
    ('kfl001_plate_draft', 'kfl001_plate_v1'),
    ('KFL001_Plate_Draft', 'KFL001_Plate_V1'),
    ('KFL001 8mm plate DRAFT - centre cut unverified', 'KFL001 8mm bearing mounting plate V1'),
    ('Parameters - centre diameter UNVERIFIED', 'Parameters - dimensions in mm'),
    ('TEMPORARY ONLY - verify real KFL back geometry', '39 mm clearance for user confirmed 38 mm boss'),
    ('TEMP_CentreHole', 'CentreHole'),
    ('Plate_DRAFT', 'Plate_V1'),
    ('DRAFT bearing plate - centre 39mm NOT verified', 'KFL001 bearing mounting plate V1'),
    ('KFL001_plate_DRAFT', 'KFL001_plate_V1'),
    ('center_diameter_provisional', 'center_diameter'),
    ("'center_UNVERIFIED':True", "'boss_diameter_user_confirmed_mm':38"),
]:
    src = src.replace(before, after)
src = src.replace('Editable KFL001 bearing mounting plate -- provisional concept only.', 'Editable KFL001 bearing mounting plate for prototype.')
src = src.replace('The centre cut is an unverified placeholder and MUST NOT be used for CNC.', 'The centre cut provides 0.5 mm radial clearance for a 38 mm boss.')
(scripts / 'build_kfl001_plate_v1.py').write_text(src, encoding='utf8')
(scripts / 'rebuild_kfl001_plate_v1.FCMacro').write_text("from pathlib import Path\nscript = Path(__file__).resolve().with_name('build_kfl001_plate_v1.py')\nexec(compile(script.read_text(encoding='utf-8'), str(script), 'exec'), {'__name__':'__main__','__file__':str(script)})\n", encoding='utf8')

src = (scripts / 'render_kfl_plate_draft.py').read_text(encoding='utf8')
for before, after in [
    ('kfl001_plate_draft', 'kfl001_plate_v1'),
    ('KFL001板_尺寸草图_禁止加工.pdf', 'KFL001固定板_尺寸图.pdf'),
    ('尺寸草图_禁止加工.png', 'KFL001固定板_尺寸图.png'),
    ('KFL001 mounting plate - provisional dimensions', 'KFL001 mounting plate V1 - prototype'),
    ('KFL001 固定板尺寸草图', 'KFL001 固定板尺寸图'),
    ('草图：中心孔仅按直径 39 mm 示意，必须实测后才能加工', '试制版：中心孔直径 39，适配直径 38 凸起'),
    ('1  中心孔：直径 39 暂定，真实凸起待实测', '1  中心孔：直径 39，适配直径 38 凸起'),
    ('中心孔可能需要改小或改轮廓，', '轴承及连接件先试装，'),
    ('请勿用本图或草模直接下单加工。', '紧固和动态强度需实物验证。'),
    ('注意：圆孔、板边与调节槽均贯穿，轴承真实外形、螺丝及垫圈待核对。', '注：圆孔和长槽均贯穿；两块相同。按孔心尺寸加工，无螺纹。'),
]:
    src = src.replace(before, after)
(scripts / 'render_kfl_plate_v1.py').write_text(src, encoding='utf8')