建立方向盘项目初始版本

2026-10-29 22:04:55 +08:00
commit 9962cbfbce
834 changed files with 1519203 additions and 0 deletions
--- a/models/symmetric_corner_18_concept/验证.json
+++ b/models/symmetric_corner_18_concept/验证.json
@@ -0,0 +1,124 @@
+{
+  "all_user_lengths_mm": {
+    "3030_long": 250,
+    "3030_cross": 70,
+    "2020_motor": 140,
+    "2020_switch": 130
+  },
+  "hole_centres_76": 26.870057685088803,
+  "corner_wall_outside_x": 38.870057685088796,
+  "rail_inside_x": 40.870057685088796,
+  "washer_thickness": 2,
+  "base_joint_checks": [
+    {
+      "name": "NewBeamBase00",
+      "cross": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "base": {
+        "vol": 0.0,
+        "dist": 0.0
+      }
+    },
+    {
+      "name": "NewBeamBase01",
+      "cross": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "base": {
+        "vol": 0.0,
+        "dist": 0.0
+      }
+    },
+    {
+      "name": "NewBeamBase10",
+      "cross": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "base": {
+        "vol": 0.0,
+        "dist": 0.0
+      }
+    },
+    {
+      "name": "NewBeamBase11",
+      "cross": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "base": {
+        "vol": 0.0,
+        "dist": 0.0
+      }
+    }
+  ],
+  "rail_centre_x": 50.870057685088796,
+  "motor_track_centres_mm": 101.74011537017759,
+  "3030_inside_gap_mm": 71.74011537017759,
+  "70_cross_member_length_mm": 70,
+  "crossbar_intersections_mm3": [],
+  "angle_rotation_degrees": 1.752313759836511,
+  "corner_checks": [
+    {
+      "corner": "NewMotorCorner00",
+      "motor_volume": 0.0,
+      "washer_corner": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "washer_rail": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "hex_volume": 0.0,
+      "hex_min_distance": 1.1562012763561405
+    },
+    {
+      "corner": "NewMotorCorner01",
+      "motor_volume": 0.0,
+      "washer_corner": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "washer_rail": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "hex_volume": 0.0,
+      "hex_min_distance": 1.1562012763561433
+    },
+    {
+      "corner": "NewMotorCorner10",
+      "motor_volume": 0.0,
+      "washer_corner": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "washer_rail": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "hex_volume": 0.0,
+      "hex_min_distance": 1.1562012763561427
+    },
+    {
+      "corner": "NewMotorCorner11",
+      "motor_volume": 0.0,
+      "washer_corner": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "washer_rail": {
+        "vol": 0.0,
+        "dist": 0.0
+      },
+      "hex_volume": 0.0,
+      "hex_min_distance": 1.1562012763561411
+    }
+  ],
+  "fan_hits": [],
+  "note": "All 12 small angles replaced with nominal 20x20x16x1.8; 6 long-slot angles retained; real T slots, screws and fan hubs unmodelled."
+}